Pro-Ject T1, Turntable with 8,6″ Project 8.6 Tonearm and Ortofon OM5e MM Phono Cartridge [T-Line].
Audiophile Entry Level Turntable
A New Generation of Turntable – Made in Europe
The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables.
The new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.
In the box:
|Speed||33,45 (manual speed change)|
|Speed variance||33: 0.7% 45: 0.6%|
|Wow & Flutter||33: 0.25% 45: 0.23%|
|Platter||Heavy 8mm, blasted-glass platter with felt mat|
|Main bearing||Stainless steel/brass|
|Signal to noise||65dB|
|Effective arm length||218.5 mm|
|Effective tonearm mass||8.0 g|
|Counterweight for mass||5 – 10g (pre-mounted)|
|Tracking force range||0 – 50mN (17.5 mN pre-adjusted)|
|Included accessories||dustcover, feltmat|
|Built-in Power Supply||230V 50Hz (US: 110V 60Hz)|
|Power consumption||3 Watt max|
|Dimensions||415x100x335 mm (WxHxD)|
|Weight||3.8 kg net|